EFIS Modul

From Air Navigation User Manuals
Jump to navigation Jump to search
This page is a translated version of the page Introduction to the EFIS module and the translation is 21% complete.
Other languages:
Deutsch • ‎English • ‎español • ‎français • ‎português



Das EFIS Modul besteht aus einer grafischen Benutzeroberfläche, welche das Gelände in 3D während des Fluges anzeigt. Um diese Funktion zu benützten, müssen Sie erst die 3D Daten vom Map-Store herunterladen. Dies sind sehr komplexe Daten, die sowohl für das EFIS-Modul sowie auch für den Höhengraphen funktionieren. Sobald Sie dieses Modul in Air Navigation Pro installiert haben, brauchen Sie die "Free Elevation data" nicht mehr zu installieren.

EFIS.jpg

caption

In order to get into the EFIS module, you will first need to activate the previously installed 3D map of your choice and press the button of the EFIS module, which you can find in the top tool bar. (see screenshot)


It will show an elevation indicator on your right and a groundspeed indicator on your left.

At the top of the screen, it will show the Heading indicator.

In the middle of the screen the Artificial Horizon. EFIS code engine has been programmed to work close to a real one.

At the bottom, there`s a green button that shows a different label depending on how and where you are flying.


You might see the following:

Editbutton.jpg You can freely navigate throughout the terrain in this mode.

Calibrate.jpg Press it for 2 seconds to calibrate it according to your device`s position.

Gmini.jpg This will show when using an AHRS G mini gadget.

Xplane.jpg You will show when using Air Navigation Pro with X-Plane.

Fsx.jpg You will show it when using Air Navigation Pro with FSX.


caption

In order to make use of the Artificial Horizon and heading indicator, you must have an iPad/iPhone with internal gyroscopes (iPhone 4/4S/iPad 2 and newer versions).



Back to index