Difference between revisions of "QNH Setup/en"

From Air Navigation User Manuals
Jump to navigation Jump to search
(Importing a new version from external source)
 
(Importing a new version from external source)
 
(7 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
<languages />
 
<languages />
 +
<br />
 
----
 
----
 +
 
[[File:altbaro.jpg]]
 
[[File:altbaro.jpg]]
 +
<br />
 +
<br />
 
When using a [[Sensors#Pressure_Sources|pressure source]] for the altitude, '''"(baro)"''' will appear next to '''ALT''' instead of "(gps)" in the bottom bar.  
 
When using a [[Sensors#Pressure_Sources|pressure source]] for the altitude, '''"(baro)"''' will appear next to '''ALT''' instead of "(gps)" in the bottom bar.  
  
 
Since the altitude of the barometer has to be corrected by the actual atmospherical pressure, the QNH can be changed in Air Navigation Pro. This will have an effect on the altitude display.
 
Since the altitude of the barometer has to be corrected by the actual atmospherical pressure, the QNH can be changed in Air Navigation Pro. This will have an effect on the altitude display.
  
You can change this setting manually by tapping on QNH on the bottom bar or automatically download the QNH information via Internet of the nearest weather station. This last option is set by default in Air Navigation Pro.
+
You can change this setting manually by tapping on QNH on the bottom bar or automatically download the QNH information of the nearest weather station via internet. This last option is set by default in Air Navigation Pro.
  
A message will appear with a timestamp on when this information was downloaded for the last time. You can also press on the arrow to push this information manually.
+
A message will appear with a timestamp of when this information was downloaded for the last time. You can also press on the arrow to refresh this information manually.
  
 
You can change the unit of the QNH under "Configuration - Settings - Units".
 
You can change the unit of the QNH under "Configuration - Settings - Units".
Line 16: Line 20:
 
----
 
----
 
<br />
 
<br />
Back to <u>[[Air Navigation Android|index]]</u>
+
Back to <u>[[Air Navigation Android|index]]</u>.

Latest revision as of 18:29, 12 November 2015

Other languages:
English • ‎español • ‎français



Altbaro.jpg

When using a pressure source for the altitude, "(baro)" will appear next to ALT instead of "(gps)" in the bottom bar.

Since the altitude of the barometer has to be corrected by the actual atmospherical pressure, the QNH can be changed in Air Navigation Pro. This will have an effect on the altitude display.

You can change this setting manually by tapping on QNH on the bottom bar or automatically download the QNH information of the nearest weather station via internet. This last option is set by default in Air Navigation Pro.

A message will appear with a timestamp of when this information was downloaded for the last time. You can also press on the arrow to refresh this information manually.

You can change the unit of the QNH under "Configuration - Settings - Units".

Qnh1234.jpg



Back to index.