Introduction of the Moving Map

From Air Navigation User Manuals
Revision as of 17:13, 22 October 2015 by Oliver (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search
Other languages:
Deutsch • ‎English • ‎español • ‎français • ‎português

In Air Navigation, you can create a route/waypoint directly from the moving map. It is possible to add intermediate waypoints to your current route during a flight (to avoid bad weather conditions for example).

By default, the moving map is centered on your current location, north oriented. By pressing to the symbol in the top left corner, you can toggle between:

Northoriented.jpg North oriented, current location in the center of the screen, moving;


Trackoriented.jpg Track oriented, current location at 1/3 the bottom of the screen, rotating to match current track, moving;

Freemode.jpg Panned mode;

Touching and moving the map will switch to panned mode. In this case the map will be moved to the location of your choice, north oriented. It will not move to follow your current location, instead, the aircraft symbol will move on the map, possibly leave the screen area. You can center the map again and restore map movements by pressing once on the symbol in the top right corner.

Touching an area of interest on the map will reveal a popup with useful information. Touchable items are:

  • Waypoints: elevation, type, full name for Navaids and their frequency, Airports runway and frequency information. We also included: Sunrise/Sunset time and Bearing/Distance from current position.
  • Airspace: lower and upper limits, name, class and additional information.
  • METAR/TAF stations: Weather information of an Airport. You enable them in the «Map Otions» menu.

Third.jpg VMC - Visual Meteorologiacal Conditions (VFR allowed)


Fourth.jpgMarginal VMC (VFR only controlled)

Fifth.jpgIMC - Instrumental Meteorological Conditions (Only IFR flights)

You can simplify the information of METAR/TAF by enabling the option “Raw METAR/TAF” under «Settings».

On iPad, pressing outside the popup will hide it, on iPhone you have to press the close button in the top right corner of the popup.

When in «Flight mode» (default), pressing on the name of the waypoint will ask you if you want to select this waypoint and affect it to an instrument or direct to the point in the moving map.


Back to index