Difference between revisions of "Pair 2 devices"

From Air Navigation User Manuals
Jump to navigation Jump to search
(Created page with "---- Communication between 2 iOS devices is established by connecting the 2 devices via <span style="color:#0000ff">'''BLUETOOTH.'''</span> The procedure to start the connecti...")
(No difference)

Revision as of 18:45, 24 August 2015


Communication between 2 iOS devices is established by connecting the 2 devices via BLUETOOTH. The procedure to start the connection is as follow:

  • Enable bluetooth at system level on the iPhone, iPod or iPad settings on both devices.
  • Enable the «Share GPS via bluetooth» option in Air Navigation

settings on the master device (usually the device with an internal GPS).

Pair.jpg

  • Enable the «Internal Sensors bridge» in the «Toos» menu on the slave device (usually a device without GPS).
  • Connection should occur automatically when a suitable master device is detected. You can monitor connection state in the sensor bridge. Green means that you are connected and receiving GPS data.

Pair2.jpg


Note: in order to maintain the connection Air Navigation Pro must be running on both devices at the same time during the whole flight.



Back to index