Pair 2 devices
Communication between 2 iOS devices is established by connecting the 2 devices via BLUETOOTH. The procedure to start the connection is as follow:
- Enable bluetooth at system level on the iPhone, iPod or iPad settings on both devices.
- Enable the «Share GPS via bluetooth» option in Air Navigation settings on the master device (usually the device with an internal GPS).
- Enable the «Internal Sensors bridge» in the «Toos» menu on the slave device (usually a device without GPS).
- Connection should occur automatically when a suitable master device is detected. You can monitor connection state in the sensor bridge. Green means that you are connected and receiving GPS data.
Note: in order to maintain the connection Air Navigation Pro must be running on both devices at the same time during the whole flight.
Back to index