Pair 2 devices

From Air Navigation User Manuals
Revision as of 13:54, 27 October 2015 by Oliver (talk | contribs)
Jump to navigation Jump to search
Other languages:
English • ‎español • ‎français



Communication between 2 iOS devices is established by connecting the 2 devices via BLUETOOTH. The procedure to start the connection is as follow:

  • Enable bluetooth at system level on the iPhone, iPod or iPad settings on both devices.
  • Enable the «Share GPS via bluetooth» option in Air Navigation settings on the master device (usually the device with an internal GPS).


Pair.jpg

  • Enable the «Internal Sensors bridge» in the «Tools» menu on the slave device (usually a device without GPS).
  • Connection should occur automatically when a suitable master device is detected. You can monitor connection state in the sensor bridge. Green means that you are connected and receiving GPS data.


Pair2.jpg


Note: in order to maintain the connection Air Navigation Pro must be running on both devices at the same time during the whole flight.



Back to index